How do I find RCA Universal Remote Codes List 4 Digit?

Universal remote controls are always a savior when it comes to juggling between multiple remotes for multiple devices. RCA universal remotes are the best kind of universal remotes. If you connect them properly, RCA universal remotes make it easy to control devices like DVD, TV, VCR, Cable box, and other devices too. All you need to do is to program the RCA universal remote with your devices. In this guide, we will tell you about RCA universal remote codes, list 4 digits, and the ways to program it.

RCA universal remote codes are used to program the remote with devices like DVD, TV, Cable box, etc.  These are three, four, or five-digit codes. In the following section, you will find the complete list of RCA universal remote codes list 4 digit. These are mentioned alphabetically so you can choose the required for your devices easily.

List of 4 Digit RCA Universal Remote Codes

The list contains fast running and simple 4 RCA universal remote codes 4 digit. You can choose the required code and follow the setup guide given below.

…codes-list…

RCA Universal Remote Codes

There are three, four, and five-digit RCA universal remote codes and the codes are chosen according to the brands which suit your device to program your RCA universal remote.

4 Digit Codes for RCA Universal Remote

If you’re following the manual methods, then you need the codes to program your RCA universal remote controls. Here, in the below table, you can find out the RCA universal remote codes list 4-digit. You select one code as per the TVs brand and follow the manual method to your RCA universal remote.

How do you Program RCA Universal Remote Control Without Codes

There is a method that doesn’t require manual programming of RCA universal remote control and the method is known as the auto search method and the RCA remote will scan all the universal remote at a time to find out the correct code. By using this method you can also program RCA universal remote to the TV, DVD, STB, Blu-ray, or any other device. for programming follow some instructions given below 

  1. To begin with, TURN ON your device that you want to work the universal remote.
  1. SWITCH ON the universal remote and tap on the component button (TV, CBL, OK\SEL, DVD) for 3 seconds. An LED light will TURN ON when the device is ready to program.
  1. Next, hold down the POWER button until the device TURNS OFF and if the device performed accordingly, that means RCA universal remote has found the required code.
  1. Again, press the POWER button to verify the code is working, and if the device TURNS ON, this means that the RCA universal remote is connected to the device
  1. Lastly, save the code. To save the code click on the DEVICE button that’s all now, you’re done with the programming method.

What are the Ways To Program RCA Universal Remote Control?

You can use different ways to program RCA universal remote, namely the auto-search and manual methods. For the manual process to program RCA universal remote, you need the list of 4 digit RCA universal remote codes. AS the steps can be difficult to perform, we have mentioned both the methods in a simple and quick guide. Read further and know how to program RCA universal remote control in a simple way.

How to Program RCA Universal Remote Using Manual Method?

  1. First of all, switch on the RCA universal remote and the device you want to program.
  2. Now, on the RCA universal remote, press the component button (TV, DVD, VCR, etc.).
  3. Press and hold the “Setup” button on RCA universal remote unless an LED light flashes indicating that the remote control is now in learning mode.
  4. Now, from the RCA universal remote codes list 4 digit provided above, choose the required code and enter it using the numeric keypad.
  5. After entering the code, aim the RCA remote towards the TV and then press and hold the “Power” button to check if the device responds.
  6. Keep holding the button unless the device turns off. Your programming is now successfully completed.

Note: If the device does not respond, you can simply pick another code from the list of 4 digit RCA universal remote codes and follow the steps again.

How to Program RCA Universal Remote using Auto-Search Method?

  1. The first step is to switch on the device that you want to program with RCA universal remote control.
  2. Now, press and hold the component button on the RCA remote corresponding to your device, e.g., TV/DVD, etc. The LED flash indicator will blink twice, showing the learning mode.
  3. After that, hold the RCA remote in front of your device and press the “Ch+” and “Ch-“ buttons. The Vivitar universal remote will give On/Off signals. Keep pressing the keys unless the device turns off.
  4. To verify if the programming is correctly done, press the “Power” button on RCA universal remote. If the device turns off, this shows that programming was successful.
  5. Now, save the code by pressing the Component button on the RCA remote. For confirmation, the LED indicator will now flash two times. It means that now your RCA universal remote will properly work with the device. If it does not, you can repeat the process.

How do I Reset an RCA Remote Control

You don’t need to replace the RCA remote when the remote is not working properly. To overcome this remote, you just need to reset or reformat its memory. When you do this resetting process, it will erase the programming codes from the remote’s memory.

This process is similar to reformatting an MP3 player and resetting to its factory setting in the remote and it will allow you to reprogram the remote with your TV or another device. Now, follow the below steps for the reprogramming method.

STEP:1

Take off the battery cover which is located in the back of the remote.

STEP:2

Remove the batteries from your RCA remote, now turn the remote to the number pad.

STEP:3

Next, hold down the number “1” button in the remote for 60 seconds. Release the button, and wait about 10 seconds now, try to repeat this step two to four times to clear the remote memory.

Step:4

Now, turn the remote and place the batteries and close the batteries with the cover. The remote is ready to program

How to Reset RCA Smart TV Remote

Tap and hold down the #1 button on the number pad for 60 seconds.

You have to do the above steps three to five times to clear your remote.

When you insert batteries, it’s start to reprogram

After resetting the RCA remote, reprogramming is required.

Why- RCA Remote is not working?

To reset the RCA remote, follow the few steps given below

 

  1. Remove your RCA remote batteries
  2. Press and hold on the number “1” key for a few seconds in the remote, it is needed to reset the microprocessor inside the remote.
  3. when the lights turn on, reprogram the remote 
  4. when the light remains off, there is a problem with the batteries, so bring new batteries and replace them.

Is there a Reset Button on RCA TV?

Press and hold down the MENU button for 10 to 15 seconds which is placed on the top or side of your TV. An on-screen menu will appear asking you to enter time, date, and location setting. Fill in the details and once you complete this procedure your TV will reset to factory settings.

How to Reset Tv Without Using a Remote?

In some TVs, you can reset and lock without using any remote. 

Hold down the POWER button for about 5 seconds.

Now, the TV will automatically restart.

If the lock is still on, then unplug the TV and remove the battery from the back of the TV.

 

Leave a Reply

Your email address will not be published. Required fields are marked *