Connect with us

samsung universal remote

xfinity remote codes for Samsung TV & Program Method



If you have recently purchased a Samsung TV and need to program it with your Comcast remote control, you have come to the right place.

In this article, we are going to provide you with a list of Samsung TV codes so you can effortlessly connect your Comcast remote control to your Samsung television.

Through this method, you may easily operate your Samsung TV with the Comcast remote control, providing a hassle-free entertainment experience.

This Comcast remote will help you to operate not only your Samsung TV but also other devices with just a single remote control. So let’s jump right into TV code programming and improve your remote control setup.

List of Samsung TV Codes for programming the Comcast Remote

If you want to set up your Comcast remote with your Samsung TV, you need codes. Here, you will find the best pairing Comcast remote codes for operating your Samsung TV. So, find the right code for your Samsung TV and continue with the programming process.

5 digit code for XR2, XR5, XR11, XR15 Model

13382 10587 10178 10329 11755 10019 12278 10814 12051 10032 11060 12284 10702 11903 10030 10766 10037 12280 11959 11581 10060 13118 10650 10408 10056 11632 11575 10217 10482 10427 11597 12268 10812 11454 12281 10090 12253

5 digit codes Digital Adapter Remote

10060 10037 10408 11597 10427 11060 10032 10329 10702 10814 11632 10090 11575 11959 10766 10030 10110 10178 10019 10217 10812 10482 10587 10056

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Dish Remote Codes

Dish Remote Codes for Samsung TV & Program code



Are you having trouble controlling your Samsung TV with your DISH remote? If so, you’re not alone. Many DISH customers find that their remotes don’t work seamlessly with Samsung TVs. The good news is that there are a few simple steps you can take to program your DISH remote to work with your Samsung TV.

Dish Remote Codes for Samsung TV

There are a few different DISH remote codes that you can use to program your remote to work with your Samsung TV. The most common codes are 505, 520, and 627.


To program your remote, follow these steps:

  1. Turn on your Samsung TV.
  2. Enter the DISH remote code for your Samsung TV. The code is typically a three-digit number.
  3. Press the “Enter” button on your DISH remote.
  4. The red light should blink once, and then the remote should be programmed.

If the code you entered does not work, try one of the other codes listed above. You may also need to try entering the code multiple times before it works.

Dish Remote Program Guide

In addition to programming your DISH remote to work with your Samsung TV, you can also use the DISH remote to control other devices in your home theater system. For example, you can use the remote to control your DISH receiver, DVD player, and audio system.

To program your DISH remote to control other devices, follow these steps:

Step-1 Turn on the device you want to control.

Step-2 Press and hold the button on your DISH remote that corresponds to the device you want to control (e.g., “SAT” for DISH receiver, “DVD” for DVD player, or “AUX” for audio system).

Step-3 Enter the DISH remote code for the device you want to control.

Step-4 Press the “Enter” button on your DISH remote.

Step-5 The red light should blink once, and then the remote should be programmed.

Additional Tips

Here are a few additional tips for programming your DISH remote:

  • Make sure that the batteries in your DISH remote are fresh.
  • If you are still having trouble programming your DISH remote, you can contact DISH customer service for assistance.

Continue Reading

samsung universal remote

How To Program Cox Contour Remote To Samsung Tv



If you need to know about cox remote tv codes? This article will provide all the applicable cox contour remote codes. As you know, the program code helps the devices and the remote pairing. When you place the needed code and you program successfully.

Then, your device will respond to your cox contour remote. To enter the key code, you have to follow up the program method.

Here, we will explain to you how to program the cox remote to Samsung tv. But, first, you have to pick the one remote code which suits your device. For your ease, we have listed the digit code under the brand name. 

You have to search for your device\brand name in the given cox Samsung tv code list. when you find your code, enter the code using the program method. You have to follow the given procedure to see the best result. To make it easy, we explain to you in a step-by-step method. Do not miss any of the steps, all the steps are necessary. 

To enter the key code, use the number pad of the cox contour remote control.

 Enter the digit of the code correctly. If the digits are misplaced or missed out, your device will not accept the code.

 Ensure, to remove all the distractions before programming. 

You have to start programming with a calm mindset. 

This process will take a minimum of 5 or fewer minutes. If errors occur then, it will take much more time. 

Cox Contour Remote Tv Codes

Here, you will get the cox Samsung tv code list. You have to find your brand name and pick up one of the codes. When you have selected the code if you want you can write down the digits on paper. This trick is useful, at the time of programming. If you are following the programming steps. In between, you have to enter the code then, you have to scroll. So, when you already note down the code in a paper. Then, you don’t need to scroll and all. Just by seeing the paper, you can place the code without missing any digits. First, select the code that you want to program. Now, you can search for your cox contour remote tv codes in the following table. 

0812, 0060, 0702, 0178, 0030, 0039, 0587, 0650, 0766, 0814, 1060, 1575, 1632

How To Program Cox Contour Remote To Samsung Tv

The following are the steps for the manual method. In this manual method, you have to enter the key code that you have selected from the cox Samsung tv code list. when you enter the key code the device will accept it. Then, You can operate your device with the Cox contour remote. If you follow the below guidelines correctly then, you can program successfully. Let’s start processing

  1. Plug in your Samsung Tv and turn on the Cox contour remote control. 
  2. Ensure, the remote control is completely fine. If it has any issues then, replace the batteries. 
  3. You have to press and hold on to the MUTE button along with the SELECT button. Wait until the button blinks two times then, release the buttons.
  4. A new screen will pop up asking for the remote code. enter the code list that you have selected from the above Cox contour remote code list. 
  5. After entering the key code, press the power button on the remote control. While pointing the remote control to the Samsung tv. When the tv turns off then, the code that you have entered is correct. When the device does not respond to the power button then, it must be the wrong code. 
  6. When the device turns off, try to turn on the tv and check it. You have to press a different button to confirm that the remote is operating your device.
  7. If you face any issues then, you can try with different codes.
  8. When the remote buttons are not working. The device does not turn off. Then, you can apply the next code using the same procedure. Apply this method, until you get your device code. 

Continue Reading

samsung universal remote

Samsung TV Universal Remote Code & Program Method



Samsung is a famous brand in electronics and is mostly found in many houses. Obviously, after the daily busy schedule, everyone needs to have entertainment. But using the different remote control for operating different devices at your home is somewhat confusing and makes you irritable.

For avoiding that, here, we have mentioned the universal remote control that can operate multiple gadgets at a single time. If you have a Samsung TV at your home and wanted to control it with the universal remote, you will require codes for programming it.

Samsung TV Universal Remote Code

To get those codes, you must go through this article and get the compatible code for your device. In this post, you will get 3-digit codes for Samsung TV, 4-digit codes and even 5-digit programming codes.

Moreover, you will also get the programming instructions which you have to follow carefully. So, program your favourite Samsung TV with the best pairing code and get non-stop entertainment with the one-stop universal remote control.

Get the 3-Digit Remote Codes for Samsung TV

If you want the three-digit codes for setting up the Samsung TV, get them in the below table. You have to scroll down the table and find a code that matches the make and model of your device. Once you find the code, enter it and follow the programming instructions mentioned here. If one code fails to work out, try out with another code from the given list.


Get the 4-Digit Remote Codes for Samsung TV

Are you looking out for 4-digit remote codes for programming your brand Samsung TV, check out the below-mentioned table? Here, you will get more than one code for your device, so no need to worry if one code does not work out with your device. Go through the table and find the compatible code for Samsung TV and perform the programming steps.


Get the 5-Digit Remote Codes for Samsung TV

For programming the Samsung TV, you must add the pairing code before performing the programming instructions. Here, you will get the 5-digit remote codes for your Samsung TV wherein you have to choose the perfect one for your device. So, find the best working code from the list of Samsung TV codes and program your brand device.


Samsung Remote Codes for Philips TV


GE Universal Remote Codes for Samsung TV


Samsung One for All Remote Code


step-by-step guide to program Dish Remote to Samsung TV

How to set up the Universal Remote Control for the Samsung TV?

Carry out the step-by-step instructions given below for programming the Samsung television:

Step-1 Turn on your Samsung TV set first and make sure that the DTA is on and installed in the right

Step-2 Hold the universal TV remote to face the adapter that you want to program.

Step-3 You will get the ‘PROG’ option on your universal remote. Hold this button till the small LED
light on the remote turns on. Press the ‘INFO’ switch.

Step-4 If the first three steps are correct, you will find that the small LED light will continue to flash.

Step-5 Find the working code from the given table and enter it using the remote’s keypad. If you
enter the correct code, the TV will display ‘Success’. And if not, do the programming with
another code. On the other hand, if you insert the wrong code, the TV will show ‘Sorry’.
Repeat the method by using another code from the code list.

Finally, click on any of the function buttons on your remote control. If the buttons are
working that means you performed the steps correctly. If the buttons do not respond, use
another code from the list of Samsung TV codes.


In this blog, you came to know how to program your Samsung TV by entering the correct code. In the above table, you will get all types of codes for programming the Samsung television. You have to find the correct one and enter it using the remote’s keyboard.

So, set up your Samsung TV with the best pairing code and have fun without any interruption. Share this post with many people and if any concerns, write to us.

Continue Reading