An RCA universal remote is something functional and easy to use for your living room. This remote comes in handy when you lose the original remote of your device.
A universal remote can control many devices at a single time. With the correct setup and programming, this RCA universal remote will be the right solution for your TV, component and audio system. But for programming the RCA universal remote, you will need remote codes.
While programming the device, you have to enter compatible codes so that your smart device easily connects with the RCA remote. In this way, your system and the RCA universal remote will speak the same language.
What Is the 5 Digit Code for Rca TV
Moreover, you will come across different programming methods which are very easy to follow. After entering the correct code, perform the programming steps carefully. Once you insert the matching code for the device, you are all set to use your favourite device with the RCA universal remote.
Rca Universal Remote Codes List 5 Digit
There’re many Rca Universal Remote TV Codes with the brand names of your device provided in the code list. Check Rca Remote Code List and pick the one which matches your device and program in your universal remote.
Rca Universal Roku Remote Codes
Rca Remote Setup Code Toshiba TV
If you can’t find a list of rca universal remote codes 5 digit for the Programming Toshiba TVs then we’re here to help you to find your correct code. Select a code and use a manual method to program your universal remote.
Rca Universal Remote Setup Codes for Sony TV
Rca Remote Setup Code for Philips TV
RCA Remote Code->Magnavox TV
Here, we’ve mentioned the complete list of Rca Universal Remote Programming Codes for Magnavox TV. You can find out the correct code with the help of the above manual method, program your remote.
Rca Universal Remote Code Insignia
The RCA Universal Remote Programming Codes insignia is here. check out the below section and find out the correct code to program your remote.
RCA Remote setup Codes for Philips DVD Player
If you bought a new universal remote and you need Rca Universal Remote Programming Codesto to activate, then you’re in the right place. We’ve listed the RCA Universal Remote Programming Codes for the Philips DVD player below.
RCA Remote Codes->Blu-Ray Player
Rca Setup Code for Jvc Remote
Do you want to know about Rca Universal Remote Programming Codes for JVC Tv? If yes, then surely check out the code table you’ll find below, where you can select the needed code.
RCA Remote Codes ->Onn DVD Player
If you want to know the Rca Universal Remote Programming Codes for the Onn DVD player, then check the below section, where you can find the complete list of codes.
Rca Universal Remote 5 Digit Codes for Lg TV
The RCA Universal Remote Programming Codes for LG tv is available here. You can find out the correct code in the table. Select the needed one
RCA Remote Code ->Samsung DVD Player
Samsung DVD 5 Digit Remote Codes:
Programing Rca Universal Remote Codes
If you bought a new RCA universal remote and want to know how to program it, follow the methods we’ve mentioned. In this article, you can learn the programming process for universal remote along with the codes so let’s get started.
- Find the correct code for the device that you operate with the RCA universal remote. You can find the code provided in a manual paper with the remote or the code list below.
- Now, SWITCH ON the device.
- Point the remote to the device, Press and Hold the Code Search Button on the remote.
- Holding the code search button, press the device button you want to operate. For example, if you’re pairing the remote with a TV, then select the TV key and if you’re going to pair it with a DVD player, select the DVD button, and the light will blink in the remote.
- While holding the device button, you have to enter the code using the number pad in the remote, and when the code is entered, the light will TURN OFF.
- Finally, test the remote by pressing the remote key. If the code you entered is not working, try with another Rca Universal Remote Programming Code until you get the correct code. By applying the same process as we’ve discussed above.
Know How to Setup Rca Remote With Code
You can program the RCA universal remote control for your various audio and video devices in two ways. The manual and automatic methods are both workable for the task. However, follow the automated procedure to set up the device instantly.
The Automated Way:
In automatic search methods, all universal remote code has passed the scanning process on the remote. It examines the correct remote code, which can be used on the remote, into the program control.
Step -1 Find your device code from the given list
Step -2 Click on Search Code and “HOLD.”
Step -3 Switch to smart devices such as the “TV” you want to use to operate a universal remote.
Step -4 “Turn” on your device for 3 seconds (TV, DVD, CBL, and OK / cells). The LED light indicates that the device is ready for the program.
Step -5 Point the remote toward the device and click the channel up and down buttons.
The remote signal will show turn off. Press the “Up” button or “down” until the device is closed.
Step -6 Verify the code by clicking the “Power” button. The device has to be turned on. If it starts, try to change the channel to verify that the remote is properly programmed.
Step -7 To save the code, press the “device” button. The device will blink twice to confirm and save the code.
The Manual Way:
Using code, we can easily set up universal remote programs, and code identifies your device.
Step -1 To get started, you need to “activate the device”.
Step -2 Press “TV” on the remote “RCA universal.”
Step -3 Now hold the “setup” button from the universal remote until it indicates the “flash” (meaning in “learning mode”)
Step -4 Finally, enter the “Keycode” collected. After completing this process, “Point to the remote on the TV” and press “Power.”
Step -5 When is the screen switch, you can release the “power button.”
These are all; the TV will work well with universal remote control. If your device is not working, repeat the same process from the same code as the same reference table.
How to Program an RCA Universal Remote to DVD Player
You can apply the same process we discussed above topic of how to program an RCA universal remote. Choose the correct code for your DVD player.
STEP:1 TURN ON your device.
STEP:2 Press and hold the code search button on the remote. While holding the code search button,
STEP:3 press the component (DVD button), and the remote light will blink.
STEP:4 Now, enter the code while pressing the DVD button, and the light will turn OFF when the code is entered.
At last, check if the remote key is functioning correctly. That’s it. You’re with this process to program an RCA universal remote to a DVD player.
How to Setup an RCA Remote to a Magnavox
Here are some steps to program an RCA remote to a Magnavox Tv. Let’s walk into the steps.
STEP:1 First, check the batteries are working correctly. When the batteries are in working mode, SWITCH ON your TV.
STEP:2 Hold on to the TV and SEL button for 3 seconds. The controls start to light up.
STEP 3 Pointing the remote towards the TV and the code. The code which you have chosen in the code list.
STEP:4 Press the volume + button and turn the TV volume up to verify.
STEP:5 Now press the TV button to store your code, and The light will blink twice to ensure that the code has been saved.
How to pair RCA Remote to TV
STEP: 1 TURN ON the device
STEP: 2 Press and hold the TV button to point the TV to the device.
STEP: 3 The light turns on, and now press and hold the ON\OFF signal till the light turns on again.
STEP: 4 For about 5 seconds, hold the play or the slow button on your remote, and the TV should turn off.
STEP: 5 If the TV remains off, that means it’s working and if the TV doesn’t turn off, press the play or slow button again and again until the device turns off.