Program a Zenith Universal Remote Control With Code List

You may have recently acquired a Zenith universal remote control or realised that the remote control for your Zenith television is no longer working. It is necessary to programme the Zenith remote in order to use it with your various electrical devices, such as your television, VCR, and DVD player, before you can use it with them. Unless otherwise specified, all Zenith remote controls are pre-programmed with the required codes. If you do not have these Zenith Universal Remote Codes , you may still configure your Zenith remote in a matter of minutes even if you have lost them.

Zenith Universal Remote Codes

To configure Universal remote with devices, you will need to know the entire set of Zenith Universal Remote Codes , which you can find below.

Zenith Universal Remote Codes for Jvc TV

902502
606007
510308
702417
617208
108

Zenith Universal Remote Codes for Magnavox TV

510502
008408
109508
002402
118309
209

Zenith Universal Remote Codes for Memorex TV

701601
102506
502

Zenith Universal Remote Codes for Mitsubishi TV

803510
102002
619509
709114
206502

Zenith Universal Remote Codes for Panasonic TV

901516
807618
017

Zenith Universal Remote Codes for Philips TV

002009
502202
508209
402109
310408
221

Zenith Universal Remote Codes for Proscan

601719

Zenith Universal Remote Codes for Rca

002102
302502
514511
320514
402411
406

Zenith Universal Remote Codes for Samsung TV

212002
502818
512102
908103
702112

Zenith Universal Remote Codes for Sansui TV

215

Zenith Universal Remote Codes for Sanyo TV

619412
902312
506002

Zenith Universal Remote Codes for Sharp TV

How to Get Sharp Aquos Remotes Program Instruction

502918
813712
002111
812013

Zenith Universal Remote Codes for Sony TV

202801

Zenith Universal Remote Codes for Sylvania TV

002109
009508
502309
717117
408209
402

Zenith Universal Remote Codes [All Brands ]

if your brand is not listed above Try to find given list below

Sylvania002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717
Sony202, 801
Toshiba112, 313, 413, 506, 510, 512, 902
Symphonic117, 520, 904, 906
Sharp002, 013, 111, 502, 712, 812, 813, 918
Sanyo002, 312, 412, 506, 619, 902
Sansui215
Samsung002, 102, 103, 112, 212, 502, 512, 702, 818, 908
RCA002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514
Philips002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508
Emerson002, 003, 004, 005, 006, 014, 104, 105
Funai206, 805, 906
GE002, 007, 018, 107, 310, 318, 502, 601, 719, 803
Zenith008, 117, 311, 405, 407, 512, 601, 701, 713, 916
Hitachi002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619
Magnavox002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510
Mitsubishi002, 102, 114, 206, 502, 509, 510, 619, 709, 803
Proscan601, 719
Fisher506, 606, 619, 902
Fujitsu206
Daewoo002, 102, 110, 203, 214, 221, 303, 311, 314
Craig805, 906
Goldstar002, 102, 117, 207, 217, 307, 502, 713, 818, 916
JVC007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902
Memorex102, 502, 506, 601, 701
Panasonic017, 516, 618, 807, 901
  • Programming Zenith Universal Remote without Codes:

In this method the codes in the remote are put through a search by searching one code at a time until it finds the one that works with your remote.

STEPS TO FOLLOW:

  1. Turn on the device you want to program to use with the remote(ex: If you want to setup the remote for TV then switch on the TV manually)
  2. Switch On the remote and from the various device buttons on the remote (TV, DVD, CBL and OK/SEL) press and hold the one which matches with your device for around 3 seconds until the LED lights up indicating that the remote is ready to program.
  3. Point the remote towards the device and press “CH+” and “CH-“buttons until the device turns off.
  4. To check the code, press on the power button. Once the device is turned on, change channels to confirm that the remote is programmed perfectly.
  5. To save the code, press the device button. LED will light twice confirming the code stored.
  • Programming Zenith Universal Remote Manually:

This method is useful when you have located the code of the device. The code automatically recognizes the device and thus easily program the remote.

STEPS TO FOLLOW:

  1. Turn on the device you want to program to use with the remote(ex: If you want to setup the remote for TV then switch on the TV manually)
  2. Switch On the remote and from the various device buttons on the remote (TV, DVD, CBL and OK/SEL) press and hold the one which matches with your device for around 3 seconds until the LED lights up indicating that the remote is ready to program.
  3. Enter the remote code for the device (you will find it in the instruction manual of the remote) using the number buttons.
  4. Now press and hold the power button on the remote, while pointing it towards the device until the device turns off.

This is the simplest way to program your remote. In case the device is not operating then try some different code from the manual and repeat the above mentioned steps.

  • Programming Zenith Universal Remote with Code Search:

In case you do not have the code for the device, you can then go for this method to program your remote by putting it on search mode by the use of manual codes. The remote will then be searching for a code until it finds the correct one for your device.

STEPS TO FOLLOW:

  1. Turn on the device you want to program to use with the remote (ex: If you want to setup the remote for TV then switch on the TV manually)
  2. Press and hold the Setup button on the remote while entering three digit 9-9-1 code.
  3. Next press and hold the power button and the channel up button till the device turns off.
  4. The turn off indicates that the device is programmed.

This method may be time consuming compare to the other methods but once you are done with the above mentioned steps the universal remote will work properly.

FAQ

How can I programme the remote control for my Zenith DTV converter box?

  1. Activate the converter box by pressing the “Power” button on the front.
  2. Using the remote, press and hold the “Aux” button until the indicator light flashes and then remains lighted.
  3. Switch on the television and point the remote control at the converter box.

Is it possible to utilise a converter box without the remote control?

Regrettably, the answer is NO. The converter can only be programmed using the dedicated remote control or a universal remote control unit that specifically specifies that it supports your particular model converter.

1 thought on “Program a Zenith Universal Remote Control With Code List”

Leave a Comment