Connect with us

Universal Remote Program & code

What Are the Cox Universal Remote TV Codes & Setup Guide

Published

on

These days, the number of devices is increasing in our homes. Each device comes with its original remote control. However, managing multiple remote controls for various devices is difficult.

A universal remote is the best solution for this problem of handling many remotes at a single time. COX universal remote is the best solution. To use a universal remote, you must program your remote using the Cox Universal Remote TV Codes

Complete List of Cox Universal Remote TV Codes

Below we have mentioned the complete list of COX universal remote codes for TV. You have to choose the COX Remote code as per the TV brand you want to program and follow some instructions.

After the list, we have given the detailed steps to program the COX universal remote with your TV. So, take a look at the COX Universal Remote TV Code List given below.

Cox setup Codes for Samsung Tv

00300702
08140178
07660060
06500039
05871632

Cox Remote Code for Roku TV

175612434
11756

Cox Remote Code for Vizio TV

27070864
25125631
17563758
12892512
17582757

Element Remote Code for cox XR11 :

1188610178
1218312964
1186411687
1390713559

Sony TV Remote Codes for cox XR11 Remote:

1178611904
1179111925
1001111317
1110010353
1168511400
1081010834

LG TV Remote Code -> cox XR11 :

1070011934
1199310856
1044212271
1273111032
1117810017
1126512246
1163711314
1153011758
1017810032

Samsung TV Remote Codes for cox XR11 Remote:

1190310814
1058710766
1228010702
1228111959
1017811060
1065011632
1003210329
1228410030
1006010812
1205110482

VIZIO TV Remote Code-> cox XR11 :

1086410178
1251211756
1270710885
1175812247

COX Universal Remote Codes List

Sylvania1864, 0054, 0030, 0171, 0587
Sony0810, 0000, 0834, 1685, 1786, 1904, 1925
Toshiba1524, 0154, 0156, 1256, 1265, 0060, 2724, 2006, 1959, 1945, 1936, 1935
Symphonic0180, 0171, 1394, 1904, 1944
Sharp0818, 0093, 0039, 0688, 0851
Sanyo0054, 0154, 0088, 0799, 1142
Sansui0463, 0171, 1409, 1670, 1892
Samsung0812, 0060, 0702, 0178, 0030, 0039, 0587, 0650, 0766, 0814, 1060, 1575, 1632
RCA1547, 1447, 0047, 0051, 0093
Philips1454, 1866, 0054, 0690, 1154
Disney1665, 2152
Radio Shack0047, 0154, 0180, 0178, 0030
Durabrand0463, 0180, 0178, 0171, 1034
Dynex1463, 1785, 1810, 2049, 2184
Emerson1864, 0154, 0451, 0236, 0463
Funai0000, 0180, 0171, 1271, 1904
Haier1034, 0768, 1748, 1749, 1753
Zenith0000, 1423, 0047, 0017, 0463
Hitachi1643, 1145, 0145, 0679, 0724
Hisense0748, 1314, 1660, 2098, 2355
Hyundai0849, 1219, 1294
Infinity0054
Insignia1423, 1564, 0463, 0171, 2432
LG1423, 1447, 0017, 1265, 0178
Magnavox1454, 1866, 1755, 0054, 0051
Mitsubishi1250, 0093, 0150, 0178, 0836
Proscan1447, 0047, 0030, 0466, 1347

How to Program COX Universal Remote with Codes?

1. To begin, turn on the TV that you want to program with the COX universal remote.

2. Now on the COX remote, press and hold the “Code Search” button until the LED flashes then Once the red light on the COX remote comes on, release the button.

3. Now, press and hold the TV button to connect the universal remote with the TV. The red LED will blink and remain lit on the COX remote.

4. Select the code from the list of COX remote codes above. Enter this COX universal remote code. If the code you entered is accepted, the red LED will turn off on the COX remote. If it does not turn off, select another code for COX universal remote and repeat the steps.

5. Finally, when the light turns off, press the “Power” button or Channel+, Channel- buttons on the COX remote to check if the TV responds.

Continue Reading

comcast tv codes

Comcast Remote TV Codes for Panasonic & Program Instructions

Published

on

The universal remote can be used to operate devices at home. This universal remote is all in one. You can operate Tv, DVD, and Home theatre using a branded universal remote. Many brands sell universal remotes, choose the best brand for your device.

Here, we will discuss Comcast remote control codes for Panasonic TVs. Operating a Panasonic tv with a Comcast remote can be the best choice. In this article, we will cover the Comcast remote- control codes. With the help of this article, you can also learn program comcast remote to tv. Comcast and Xfinity are under the same brand.

The following is the list of Comcast remote-control codes for Panasonic Tv. You can pick your Comcast remote code here.We have provided only the valid remote code. The digit may change after some time. But here you will receive an updated remote code only.

You have to search for your model name codes. When you enter the wrong code then, you cannot proceed further. Check the code list for your device\model name. Select the code and enter the digit on your device to program.

Now, let’s find out the Comcast remote code in the following table. You can choose any

1191910250
1129111410
1194111310
1065010226
1037510055
1016210051

XR2, XR5, XR11, XR15 for Newer Xfinity Remotes

1225111480
1192410171
1037510156
1000210032
1017811941
1134712274
1129010165
1006012273
1005410051

The following section is the method for programming. If you want to program the Xfinity remote with the Panasonic tv. Then, you must follow the following steps. This method needs remote code and it is known as the manual method. Let’s get started

How to program Xfinity remote to Panasonic Tv

Step:1 Switch on your Panasonic Tv. Turn on the Comcast remote and check if the remote has no issues. If you have any issues with the remote control, replace the batteries. 

Step:2 First, press the TV button on the Comcast remote.

Step:3 You have to press the setup button and hold the light flash. The tv button will flash two times, you can release the button.

Step:4 Now, you have to click on the setup button.

Step:5 In this step, you have to enter your program codes. The code which you have selected from Comcast Panasonic remote code list. After entering the code, you will observe a flashlight. The Tv button will flash two times. If the entered code is right.

Step:6 Press the power button, pointing the remote control towards the tv. when the device turns off. That means you have programmed successfully. 

Step:7 Now, check if the device responds to the comment. Click on various buttons like the volume or channel button and check them. When the device responds to the remote control then, you have done programming. 

If the device does not turn off after entering the code. If the device does not respond to the comments. Then, you must try with another code. when you enter the wrong code, you cannot proceed further. You can put the next code applying the same procedure. Start with step number 2, entering the next code. You can repeat this method until you get your remote code. 

Continue Reading

emerson universal remote codes

GE Universal Remote Codes for Emerson TV & Program Instructions

Published

on

Are you in search of GE universal remote codes for your favourite Emerson Television? If yes, follow this article. If you want to operate your device with a GE universal remote then you must need ge remote codes. Here you can find out the exact GE remote codes. That helps you to operate Emerson Tv. 

GE universal remote is a demanding universal remote in the market. It works well and can control multiple devices at a time. The devices like TV, DVD, VCR, BLU-RAY, etc, can operate simultaneously. In the below list, you can find the GE universal remote codes for Emerson Tv. 

Listing of GE Universal Remote Codes For Emerson Tv

The below list is all about the remote codes for GE universal remote. There are many GE universal remote codes for Emerson Tv listed. You can pick any one of them but make sure you choose one code that is suitable for your device. 

After the remote code selection, when you have the proper remote code. Next, you can jump into the program instruction method given below. When the selected code isn’t cooperating with the device. Then you can select another code from the same listing following the same procedure.

Remote ModelYear MadeGE Remote Codes for Emerson TVs
CL620225761 0201 0141 5551 0001 0951 1651 0231 2761 5741 5561 5221 5231 1551 2891 5421 4731 5831
CL520190951 5741 0141 5421 0001 4731 2761 1551 5221 1651 5551 2891 0201 5231 5761 0231 5831 5561
CL420164731 5231 2761 2891 1651 0201 0141 5761 5421 5551 5741 1551 0001 5221 5561 0951 5831 0231
CL320130441 4911 0371 5551 0741 4701 4731 1371 2191 1611 1381 2761 0001 1221 3451 5341 0731 5561 4761 5221 1451 0281 0851 0691 0271 2171 0951 0141 5421 0291 2361 0201 0031 1931 0041 2891 0701 0021 4751 4831 1651 1631 1261 1711 0231 1551 1681 0451 1461 1941 1701 1251 5231 0931
V520134911 1221 1461 1371 0931 1701 0371 0851 0281 1711 1451 0001 0441 0041 4731 0451 4701 1631 5231 3451 2761 4761 0731 1251 1381 1931 0691 1551 4831 1681 0031 2171 1611 1941 0021 0741 1261 5341 0271 0291 4751 5221 2361 2191 0701
V420125062 5048 5315 5309 5012 5171 5006 5038 5011 5061 5041 5049 5142 5325 5177 5046 5054 5029 5304 5013 5290 5030 5181 5176 5187 5168 5055 5184 5155 5310 5249 5179 5313 5039 5193 5282 5191 5014 5141 5040 5175 5186 5183 5169 5166 5253 5037 5032 5509 5174 5182 5042
V320120281 0041 0021 0271 0291 0371 0001 5231 0441 045 0031 2761 5221

Continue Reading

Dish Remote Codes

Dish Remote Codes for Samsung TV & Program code

Published

on

Are you having trouble controlling your Samsung TV with your DISH remote? If so, you’re not alone. Many DISH customers find that their remotes don’t work seamlessly with Samsung TVs. The good news is that there are a few simple steps you can take to program your DISH remote to work with your Samsung TV.

Dish Remote Codes for Samsung TV

There are a few different DISH remote codes that you can use to program your remote to work with your Samsung TV. The most common codes are 505, 520, and 627.

01612551
32112141
51913921
36010261
36614841
37114111
37712401
38113861
38811661
03013211
37415201
38113821
41013831
39210051
11813911
37111561

To program your remote, follow these steps:

  1. Turn on your Samsung TV.
  2. Enter the DISH remote code for your Samsung TV. The code is typically a three-digit number.
  3. Press the “Enter” button on your DISH remote.
  4. The red light should blink once, and then the remote should be programmed.

If the code you entered does not work, try one of the other codes listed above. You may also need to try entering the code multiple times before it works.

Dish Remote Program Guide

In addition to programming your DISH remote to work with your Samsung TV, you can also use the DISH remote to control other devices in your home theater system. For example, you can use the remote to control your DISH receiver, DVD player, and audio system.

To program your DISH remote to control other devices, follow these steps:

Step-1 Turn on the device you want to control.

Step-2 Press and hold the button on your DISH remote that corresponds to the device you want to control (e.g., “SAT” for DISH receiver, “DVD” for DVD player, or “AUX” for audio system).

Step-3 Enter the DISH remote code for the device you want to control.

Step-4 Press the “Enter” button on your DISH remote.

Step-5 The red light should blink once, and then the remote should be programmed.

Additional Tips

Here are a few additional tips for programming your DISH remote:

  • Make sure that the batteries in your DISH remote are fresh.
  • If you are still having trouble programming your DISH remote, you can contact DISH customer service for assistance.

Continue Reading

Trending