Connect with us

Universal Remote Program & code

Latest Bose Soundbar Universal Remote Codes



Bose Soundbars usually come with their remotes but what if you misplace or lose them? At such times, you can go for universal remote control. They are user-friendly and very easy to program. Bose is a famous brand across the globe due to its high-quality audio products. Their soundbars are audio-centric which most audio lovers prefer. Some of the popular soundbars are Bose 500, Bose Smart 900, Bose 700 and Bose Solo 5 has the best design and sound in the market.

Here, we are introducing you to the programming guide on how to program Bose Soundbars. For programming, you will require Bose Soundbar universal remote codes. You have to insert these codes at the time of programming the device. The codes which you are entering should match the make and model of your programming device.

So, for programming the Bose Soundbar, you will get the compatible codes in the below table. Moreover, Bose has also introduced its mobile application that has made the programming method very easy. Now, you can connect the universal remote to the soundbar by clicking a few buttons. The application will look into the rest of the other things for you. You can also operate the TV, Blu-Ray, VCRs, DVDs, etc. with the universal remote control.

What Are the Bose Universal Remote Codes & Program Guide

Bose Soundbar Universal Remote 4 Digit Code


Bose Soundbar Universal Remote 5 Digit Code


GE Universal Remote Code For Bose Soundbar


Bose Soundbar Universal Remote Code List

Brand NameRemote Codes
Philips Magnavox05965

Program the Bose Soundbar remote without codes?

All universal remote control codes have been scanned in the remote control using the automatic search method. It examines one code at a time to determine the correct remote code for programming the command. Take the following steps:

How to configure a Bose sound bar? Is it possible to use a universal remote control in a manual manner?

The keycode allows us to quickly program a universal remote and uniquely identifies the make and model of your device.

Step – 1 Turn on the Bose sound bar you want to set up.

Step -2. Activate the TV function on a universal remote.

Step -3. When an indicator light begins to flash, press and hold the SETUP button on the universal remote.

Step -4. At this point, you must input the code, which can be found on this page or in the instructions for the device you’re configuring.

Step -5. Using your remote, navigate to the Bose soundbar, then press and hold the power button.

Step -6. When the screen goes dark, you can let off of the power button.

How to use the code search function to programme a universal remote to work with your Bose Soundbar?

Assume you were unable to locate a valid code for your Bose Soundbar. In that situation, there is another option for correctly configuring your universal remote.

To get started, turn on the device you want to use.(Note: Throughout the procedure, you must keep the remote control directed at the component.)

2.Press and hold the CODE SEARCH button on the remote. Release the CODE SEARCH button when the indicator light blink.

3. Next, push and release the device button associated with the type of equipment you wish to control with the universal remote control.

4. At this point, an indicator light should flash once and remain lighted.

5. Aim the remote control at the Bose Soundbar and press and release the POWER ON/OFF button on the remote control.

6. Immediately after the Bose Soundbar powers down, push and release the ENTER key.

7. If you do not hit the ENTER button within three seconds, the remote control will send the next code on the list, and you will have to restart from Step 2.

8. If you followed the method correctly, your Bose Soundbar should now function with the universal remote. When you locate a functioning code using the approach outlined above, you may utilise the code retrieval tool to save the code for future reference.

How to manually program a universal remote to work with your Bose soundbar?

If none of the other techniques work for you, you can still configure the universal remote manually.

To begin, aim your universal remote towards the remote control for the Bose Soundbar you’re replacing.

2. Next, depending on the universal remote you have, you must hit the SETUP or MAGIC buttons.

3. At this point, you must enter the manual programming code located on your universal remote’s instruction booklet.

4. Next, you must programme a function on the universal remote, such as TV VOLUME DOWN.

5. Next, you must press and hold the matching button on the Bose Soundbar’s original remote.

6. Following that, we should observe a blinking light. This indicates that the function has been correctly saved, and we can now use our universal remote’s TV VOLUME DOWN function.

Repeat the preceding procedures for each function you wish to use with the universal remote. When you are completed programming, you must push the SETUP button to inform the universal remote that you are finished.

comcast tv codes

Comcast Remote TV Codes for Panasonic & Program Instructions



The universal remote can be used to operate devices at home. This universal remote is all in one. You can operate Tv, DVD, and Home theatre using a branded universal remote. Many brands sell universal remotes, choose the best brand for your device.

Here, we will discuss Comcast remote control codes for Panasonic TVs. Operating a Panasonic tv with a Comcast remote can be the best choice. In this article, we will cover the Comcast remote- control codes. With the help of this article, you can also learn program comcast remote to tv. Comcast and Xfinity are under the same brand.

The following is the list of Comcast remote-control codes for Panasonic Tv. You can pick your Comcast remote code here.We have provided only the valid remote code. The digit may change after some time. But here you will receive an updated remote code only.

You have to search for your model name codes. When you enter the wrong code then, you cannot proceed further. Check the code list for your device\model name. Select the code and enter the digit on your device to program.

Now, let’s find out the Comcast remote code in the following table. You can choose any


XR2, XR5, XR11, XR15 for Newer Xfinity Remotes


The following section is the method for programming. If you want to program the Xfinity remote with the Panasonic tv. Then, you must follow the following steps. This method needs remote code and it is known as the manual method. Let’s get started

How to program Xfinity remote to Panasonic Tv

Step:1 Switch on your Panasonic Tv. Turn on the Comcast remote and check if the remote has no issues. If you have any issues with the remote control, replace the batteries. 

Step:2 First, press the TV button on the Comcast remote.

Step:3 You have to press the setup button and hold the light flash. The tv button will flash two times, you can release the button.

Step:4 Now, you have to click on the setup button.

Step:5 In this step, you have to enter your program codes. The code which you have selected from Comcast Panasonic remote code list. After entering the code, you will observe a flashlight. The Tv button will flash two times. If the entered code is right.

Step:6 Press the power button, pointing the remote control towards the tv. when the device turns off. That means you have programmed successfully. 

Step:7 Now, check if the device responds to the comment. Click on various buttons like the volume or channel button and check them. When the device responds to the remote control then, you have done programming. 

If the device does not turn off after entering the code. If the device does not respond to the comments. Then, you must try with another code. when you enter the wrong code, you cannot proceed further. You can put the next code applying the same procedure. Start with step number 2, entering the next code. You can repeat this method until you get your remote code. 

Continue Reading

emerson universal remote codes

GE Universal Remote Codes for Emerson TV & Program Instructions



Are you in search of GE universal remote codes for your favourite Emerson Television? If yes, follow this article. If you want to operate your device with a GE universal remote then you must need ge remote codes. Here you can find out the exact GE remote codes. That helps you to operate Emerson Tv. 

GE universal remote is a demanding universal remote in the market. It works well and can control multiple devices at a time. The devices like TV, DVD, VCR, BLU-RAY, etc, can operate simultaneously. In the below list, you can find the GE universal remote codes for Emerson Tv. 

Listing of GE Universal Remote Codes For Emerson Tv

The below list is all about the remote codes for GE universal remote. There are many GE universal remote codes for Emerson Tv listed. You can pick any one of them but make sure you choose one code that is suitable for your device. 

After the remote code selection, when you have the proper remote code. Next, you can jump into the program instruction method given below. When the selected code isn’t cooperating with the device. Then you can select another code from the same listing following the same procedure.

Remote ModelYear MadeGE Remote Codes for Emerson TVs
CL620225761 0201 0141 5551 0001 0951 1651 0231 2761 5741 5561 5221 5231 1551 2891 5421 4731 5831
CL520190951 5741 0141 5421 0001 4731 2761 1551 5221 1651 5551 2891 0201 5231 5761 0231 5831 5561
CL420164731 5231 2761 2891 1651 0201 0141 5761 5421 5551 5741 1551 0001 5221 5561 0951 5831 0231
CL320130441 4911 0371 5551 0741 4701 4731 1371 2191 1611 1381 2761 0001 1221 3451 5341 0731 5561 4761 5221 1451 0281 0851 0691 0271 2171 0951 0141 5421 0291 2361 0201 0031 1931 0041 2891 0701 0021 4751 4831 1651 1631 1261 1711 0231 1551 1681 0451 1461 1941 1701 1251 5231 0931
V520134911 1221 1461 1371 0931 1701 0371 0851 0281 1711 1451 0001 0441 0041 4731 0451 4701 1631 5231 3451 2761 4761 0731 1251 1381 1931 0691 1551 4831 1681 0031 2171 1611 1941 0021 0741 1261 5341 0271 0291 4751 5221 2361 2191 0701
V420125062 5048 5315 5309 5012 5171 5006 5038 5011 5061 5041 5049 5142 5325 5177 5046 5054 5029 5304 5013 5290 5030 5181 5176 5187 5168 5055 5184 5155 5310 5249 5179 5313 5039 5193 5282 5191 5014 5141 5040 5175 5186 5183 5169 5166 5253 5037 5032 5509 5174 5182 5042
V320120281 0041 0021 0271 0291 0371 0001 5231 0441 045 0031 2761 5221

Continue Reading

Dish Remote Codes

Dish Remote Codes for Samsung TV & Program code



Are you having trouble controlling your Samsung TV with your DISH remote? If so, you’re not alone. Many DISH customers find that their remotes don’t work seamlessly with Samsung TVs. The good news is that there are a few simple steps you can take to program your DISH remote to work with your Samsung TV.

Dish Remote Codes for Samsung TV

There are a few different DISH remote codes that you can use to program your remote to work with your Samsung TV. The most common codes are 505, 520, and 627.


To program your remote, follow these steps:

  1. Turn on your Samsung TV.
  2. Enter the DISH remote code for your Samsung TV. The code is typically a three-digit number.
  3. Press the “Enter” button on your DISH remote.
  4. The red light should blink once, and then the remote should be programmed.

If the code you entered does not work, try one of the other codes listed above. You may also need to try entering the code multiple times before it works.

Dish Remote Program Guide

In addition to programming your DISH remote to work with your Samsung TV, you can also use the DISH remote to control other devices in your home theater system. For example, you can use the remote to control your DISH receiver, DVD player, and audio system.

To program your DISH remote to control other devices, follow these steps:

Step-1 Turn on the device you want to control.

Step-2 Press and hold the button on your DISH remote that corresponds to the device you want to control (e.g., “SAT” for DISH receiver, “DVD” for DVD player, or “AUX” for audio system).

Step-3 Enter the DISH remote code for the device you want to control.

Step-4 Press the “Enter” button on your DISH remote.

Step-5 The red light should blink once, and then the remote should be programmed.

Additional Tips

Here are a few additional tips for programming your DISH remote:

  • Make sure that the batteries in your DISH remote are fresh.
  • If you are still having trouble programming your DISH remote, you can contact DISH customer service for assistance.

Continue Reading