How One Can Reset a Samsung Remote Control?

Reset a Samsung Remote Control
Reset a Samsung Remote Control

You’re probably aware of how frustrating it is when your Samsung TV remote stops working all of a sudden. Also, there may be a variety of factors that might contribute to this state of affairs.

It’s possible that your Samsung TV remote merely needs to be reset. If you’ve examined all the hardware (such as batteries or damage) but it’s still not working after that.

Please bear in mind the manner of restoring factory settings. Will be dependent entirely on whether you are using a conventional remote or a smart remote when you perform the reset.

There are several reasons why you might need to reset your Samsung TV remote

The most common explanation for this is if something is not functioning properly. In contrast to logic, electronics have the feature of encountering faults, which is not always conceivable with rationality (more precisely, you can, but the cause of the malfunction is not obvious).

In that scenario, just asking the remote to restore the factory settings is the most effective approach to resolve the issue. It may not be the most elegant option, but it will certainly save you money in the long run.

Nevertheless, before resetting your remote, be sure that it has not been damaged, and that the battery has sufficient charge. Because if that is the issue, simply rebooting the device will not resolve the issue.

How you can reset the Samsung Tv standard remote control?

Let’s start with the regular Samsung remote control for a moment. In the event that it does not function, it is possible that you will need to reset it. However, due to the fact that it is a relatively basic technology, there is no reason to be concerned about making a mistake.

It is therefore sufficient to do the following steps to reboot a normal Samsung remote:

Step -1 Open the back cover of the book.

Step -2 Remove the batteries from the device.

Step -3 Wait for approximately 3-5 minutes.

Step -4 Place the batteries in their respective slots.

Step -5 For 10 seconds press and hold the power button on your computer.

Congratulations, your Samsung remote control has now been reset to its factory settings.

How you can reset a Samsung Remote?

Resetting your Samsung TV remote may be necessary if the device isn’t working properly. Depending on the functionality you are trying to restore, the type of remote you have, and whether or not you have followed the standard troubleshooting methods, you may need to reset your Samsung TV remote.

Reset the Samsung Remote Control Programming

A Samsung TV remote may need to be reset in order to operate a different device. A variety of Samsung TV remote controls may be programmed to control additional devices, such as a cable box, an audio system, or a DVD player, in addition to the television. You can check if your Samsung remote can operate other devices by looking at the buttons on top of it. The CBL, AUX, and DVD buttons on your remote control indicate that these devices may be controlled with the remote.

You can reset the remote’s programming by pushing and holding the “Setup” button on the device you wish to configure until the light blinks or solidifies. You may check if your gadget works by typing in the code, pressing the device button, and then selecting “Power.”. Retry the procedure and use the other recommended codes if it doesn’t work. Visit and check up the handbook for your individual TV remote to obtain codes for your device.

How you can easily reset Samsung Smart TV Remote control?

In the next section, we’ll show you exactly how to reset your Samsung smart remote. The Internet is rife with misconceptions about this issue, so I’ll attempt to simplify it for you.

Because it’s a Bluetooth device, you can normally just unplug the Samsung Smart Remote. The Samsung Smart Remote may then be reconnected to your TV.

If the preceding method doesn’t work for you, there is another option. To reset the Samsung Smart Remote, follow these instructions:

Step-1 Activate the television through the remote control.

Step-2 Press and hold down the B and C buttons.

Step-3 Enter the code 981 after the remote light flashes or blinks twice.

Why TV remote not working Samsung?

There could be several reasons why your Samsung remote does not work. Troubleshooting can help with many of these issues. Weakened batteries might cause your remote to cease working. To resolve the problem, replace the remote’s batteries.

A problem in the remote’s electronics might potentially cause the Samsung TV remote to cease operating. Remove the batteries, push the remote’s power button for a few seconds, and then reinstall the batteries. All of the functions of your remote control have been restored.

Another common reason for your Samsung TV’s remote to stop working is IR sensor failure. In order to change the channel, make sure there are no obstructions at the bottom of the TV.

How it is possible to factory reset Samsung TVs?

Are you unable to view your favorite shows on your Samsung TV because it has been stuck or frozen at a certain point? It’s advisable to reset your Samsung TV to factory defaults in order to fix this annoying problem. Samsung TVs may be restored to full functionality by following this standard procedure to reset Samsung TVs. Make sure you do this and your television will be back to normal in no time at all.

You must also do this if you want to get rid of an issue that is difficult to address or if you are in the mood to sell the problem off. Remember that this will remove all of your previously adjusted settings before proceeding. All recordings, tuned channels, and programs you’ve installed on it will be wiped clean.

Before attempting a hard reset, you should first try a soft reset to see if it fixes the problem. Continuing with a hard reset is an option if the soft reset fails to fix the problem.

How to perform a hard and a soft reset Samsung television

Perform a soft reset on your smart TV if it has been stuck or frozen. However, if the issue is severe, you may have to do a hard reset:

  • Make sure you have the TV remote control in your hand to do a gentle reboot.
  • Hold down the ‘Power’ button for a few seconds.
  • Allow a few moments for the procedure to complete.
  • Press and hold the power button one more to complete the process.
  • Your Samsung TV will undoubtedly come on as a result of this.

Perform the Hard Reset:

  • The first step is to switch on your television.
  • After that, pick ‘Support’ from the ‘Menu’ button.
  • After that, press the ‘Enter’ key.
  • Select ‘Self Diagnosis’ and press ‘Enter’ on the next screen.
  • Press “Enter” after selecting “Reset.”
  • To complete the process, you’ll need to type in the “Security PIN”.
  • The Pin, which is typically 0000, must be entered in order to proceed.
  • In the event that you’ve previously changed the PIN, enter the new one.
  • A warning notice will appear on your screen at this point, so be careful.
  • Restarting your TV is as simple as tapping ‘Yes’ to confirm your decision.

How you can pair the Samsung Smart Remote?

For the Samsung Smart Remote to operate, it must be linked to your television through Bluetooth.

There are a few things you should keep in mind while pairing your phone with a Bluetooth device. Place the remote near your TV (the typical Bluetooth range is 30 feet) and check the batteries to see whether they’re still a good amount of juice left.

Now that we’ve covered the basics, let’s move on to pairing. Activate the TV and start picking up the smart remote first. Now, press and hold the RETURN button and the PLAY/STOP button at the same time to continue. When this is done, the pairing procedure will begin and you will get a notification on the TV screen whether it is successful.

I’m having trouble locating the PIN for my Smart TV on my Samsung

Samsung Smart TVs require a four-digit security PIN, which by default is 0000. Change the existing PIN to anything else and it will function in all places you need it to. If you’ve changed your PIN and then forgotten it, you’ll need to do it again.

What are the steps to Reset a Samsung LCD TV?

Step 1: Activate it by pressing “Power” on your Samsung TV.

Step 2: Hold down the “Exit” button on the remote control for 12 seconds while pointing it straight towards the TV. Toward the right of the arrow pad, there is a button labeled “Exit.”

Step 3: The “OK” button on the popup alerting you that you are going to reset your TV will be highlighted when you press the “Left Arrow” button on the directional arrow pad.

Step 4: The TV may be reset by pressing the “Enter” button on the remote control. The device will shut off on its own.

Step 5: Press the “Power” button to re-energize the television and begin watching again. It’s now possible to set it up as if it were brand new right out of the box.

How do I reset my Samsung Smart TV’s network settings?

You must execute a hard reset of your smart TV to restore network settings. To do this, go to the ‘Self Diagnosis’ part of the TV settings’ ‘Support’ menu. Enter the PIN and follow on-screen instructions as you restore network settings during this process.


Please enter your comment!
Please enter your name here