Digital Stream TV Converter Box Remote Codes

Digital Stream TV Converter Box Remote Codes
Digital Stream TV Converter Box Remote Codes

A converter box becomes useful when you are carrying an analog TV. The Digital Stream Converter Box is one of the best brands in converter boxes. You will require Digital Stream Converter Box codes to operate your converter box to your television. You can set up all main brands of TV with this converter box remote control or a universal remote by using the codes below. These codes usually come in 3 to 5 numerical digits.

Have a look at 3-Digit Digital Stream TV Converter Box Remote Codes

A Digital Stream Converter Box is very easy to handle and operate your analog TVs. You need to enter the right code using the converter box remote control for programming your TV. The table given below will provide you with the 3-digit codes for your brand televisions.


Have a look at 4-Digit Digital Stream TV Converter Box Remote Codes

If you are having an analog TV, you can program it with a Digital Stream Converter Box remote control. Digital converter box remote saves your time and allows you to handle all your electronic devices with one single remote. In short, get away from the confusion of using many remotes for operating your devices. Below, you will get 4-digit Converter Box remote codes for programming your TV.


Have a look at 5-Digit Digital Stream TV Converter Box Remote Codes

If you are an entertainment lover, you will be having many amusement devices at your home. Use the Digital Stream Converter Box to program your TV if it is an analog device. If used the correct code for configuring your converter box remote, it helps to control your TV content easily without the confusion of using multiple remotes. Get the 5-digit converter box remote codes below for operating your favorite brand TV.


List of Digital Stream Converter Box Codes to Program an RCA Remote

If you are using an RCA remote for controlling your smart electronic devices, then the below-listed Digital Stream Converter Box codes will become useful to program the remote. Check your RCA universal remote by entering one code after another to get the right one. If got the correct Digital Stream Converter Box code, then you can enjoy your brand devices with a single RCA remote.


How do you configure Digital Stream Converter Box with an RCA Universal Remote?

The below instructional guide will help you with the programming steps:

  • Be sure to turn on your Digital Stream Converter Box and hold the RCA remote near to the Converter Box.
  • Hold down the (SAT – CBL – DTC) button on your remote control. When you click the button, your remote goes into programming mode.
  • Use any of the codes listed above with the numerical button of your remote and press the OK button to save the code.
  • Now, you need to check the function buttons on your remote. If it works, you are done with the process correctly.
  • If not, repeat steps 3 and 4 with some other code from the list.

How can I control Digital Stream Converter Box without a Remote Control?

Find these steps to switch on your Digital Converter Box without remotes:

  • First, you have to connect the tiny end of your AC adapter cable to the AC port of the converter box.
  • The large end of your converter box’s AC adapter is linked to an electrical socket close to your TV. Then, push the power key of your converter box.
  • Use any of the codes above with the number pad on the remote. Press the OK button so that you can save the entered code.
  • If you find the function buttons of your remote working, you have got the method right. If not, use the 3 and 4 steps with another code till you get the right one.

How can I troubleshoot my Digital Stream TV Converter Box?

Follow the troubleshooting process step by step:

  • Switch your TV on and press down the power button of the TV. (Note: The power key of your TV should be held down for the complete time of programming the remote)
  • After releasing the television power button, the programming ends.
  • Click the Up arrow key continuously till your TV goes off. (Note: Take one second between presses for the remote control for sending the code and the TV to respond. Press the Up arrow of the remote 105 times. Now the remote has gone through the complete list of TV codes. For another trial, use the same process. But now, you need to press the Down arrow to scan the TV codes in another direction)
  • When the TV gets off, switch it ‘On’ using the remote control.
  • Confirm that all the buttons of the TV work. (Note: If no TV buttons work, find a remote code from step 1)


In this post, you got the steps to program your Digital Stream Converter Box remote to your smart analog TV. You need to find the right universal code to pair your Converter Box with your brand device. If any further doubts regarding this topic, please connect with us and we will do the needful.


  1. I’ve been browsing on-line more than three hours as of late, yet I never found any fascinating article like yours. It’s pretty value sufficient for me. In my view, if all site owners and bloggers made good content as you probably did, the internet will be much more useful than ever before.


Please enter your comment!
Please enter your name here